High Temperature Insulation
HPC
HPC® Coating is designed to control heat transfer on surface temperatures up to 932°F (500°C). It is water-borne and extremely lightweight in appearance. HPC® Coating uses a special acrylic resin blend with specific ceramic compounds added to provide a non-conductive block against heat transfer.
HPC® Coating offers a “Green”, non-flammable, non-toxic formula for high heat surface applications over standard steam pipe or oven wall construction. HPC® Coating is easily applied using a texture sprayer, and can be applied over metal, concrete, wood, and other substrates.
If HPC® Coating is to be applied over flat steel surfaces, see manufacturer for instructions.
HPC-HT
HPC®-HT is a two-part (A+B) hybrid acrylic/silicone resin, water-based coating using specific ceramic compound loads for application directly over surfaces 200°C (392°F) and up to 600°C (1112°F). It was designed to block and hold the interior temperature on the surface and reduce heat transfer loss to ambient.
HPC®-HT Coating offers a ‘green’, nonflammable, non-toxic formula for high-heat surface applications.
HPC®-HT is easily applied, and can be applied direct to metal, concrete and other high-temperature surfaces.
HSC
HSC® Coating is designed to control heat transfer on surface temperatures up to 350°F degrees (176°C). It is water-borne, and extremely lightweight and smooth in appearance. HSC® Coating uses a special acrylic resin blend with specific ceramic compounds added to provide a non-conductive block against heat transfer.
HSC® Coating offers a “Green”, non-flammable, non-toxic formula for medium heat surface applications over standard steam pipe or oven wall construction. The coating was originally designed for hot where temperature exposures fall below applications those that would require the use of HPC® Coating. HSC® Coating is more easily applied for a smooth finish. It can be applied over metal, concrete, wood, substrates.