SuperTherm, is the most tested and certified insulation product on the market. It is these superior ratings and certifications that make SuperTherm the most revolutionary insulation product available. Exclusively available retail wise at Home Depot, SuperTherm currently holds the current certifications.
ASTM (American Society for Testing and Materials)
- ASTM B177 – Salt spray (fog) corrosion tests, 450h exposure (Passed)
- ASTM C177 – Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus (Passed)
- ASTM C236 – Standard Test Method for Steady-State Thermal Performance of Building Assemblies by Means of a Guarded Hot Box – Testing for measuring R-values (Passed)
- ASTM C411 – Standard Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation (Passed)
- ASTM C1371 – Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers (Passed)
- ASTM C1549 – Standard Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer (Passed)
- ASTM D412 – Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers-Tension – Tensile strength – 444 psi, modulus of elasticity 13,248 psi (Passed)
- ASTM D522 – Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings (resistance to cracking on metal or rubber type materials / 1″(25mm)bend / 1/4″(96mm)bend) (Passed)
- ASTM D1653 – Standard Test Methods for Water Vapor Transmission of Organic Coating Films (Passed 3%) ASTM D1654 – Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments Salt spray (fog/weathering) 450 Hour Salt Spray (Fog) (Passed – 2000 hours)
- ASTM D3273-82T – Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber (Passed)
- ASTM D3274 – Standard Test Method for Evaluating Degree of Surface Disfigurement of Paint Films by Microbial (Fungal or Algal) Growth or Soil and Dirt Accumulation (Rating degree of fungal growth or soil and dirt accumulation on paint film) (Passed – Excellent (8 out of 9))
- ASTM D3359 – Standard Test Method for Measuring Adhesion by Tape Test (Rated: 5B)
- ASTM D4060 – Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser (Passed)
- ASTM D6904 – Standard Practice for Resistance to Wind-Driven Rain for Exterior Coatings Applied to Masonry (3000 cycles)
- ASTM D7088 – Standard Practice for Resistance to Hydrostatic Pressure for Coatings Used in Below Grade Applications Applied to Masonry (Passed)
- ASTM E84-89a – Standard Test Method for Surface Burning Characteristics of Building Materials (Flame Index “0” / Smoke Index “0” – Class “A” Rating) (Passed – “0” development)
- ASTM E90 – Standard test method for laboratory measurement of airborne sound transmission loss of building partitions (Passed)
- ASTM E96 – Standard Test Methods for Water Vapor Transmission of Materials water vapor transmission (Perm Rating – 8.8 avg)
- ASTM E108 – Standard Test Method for Fire Tests of Roof Coverings (Passed)
- ASTM E413 – Standard Classification for Determination of Sound Transmission Class (STC 40)
- ASTM E514 – Standard Test Method for Water Penetration and Leakage Through Masonry Resistance to Wind Driven Rain (Passed)
- ASTM E903-96 – Standard Test Method for Solar Absorptance, Reflectance, and Transmittance of Materials Using Integrating Spheres (Passed)
- ASTM E903-96 – 4 Year Retest (Passed)
- ASTM E1269 – Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry – TPRL (Passed)
- ASTM E1461-92 – Standard Test Method for Thermal Diffusivity of Solids by the Flash Method (Passed)
- ASTM E1737 – Test Method for J-Integral Characterization of Fracture Toughness Flexibility (Passed)
- ASTM G53 – exposure to UV, elevated temperature and humidity (Passed)
© 2020 Superior Products Coatings, Inc. All rights reserved.