08 Aug 2017

HPC

Our HPC water-base spray on insulation solution replaces antiquated metal cladding insulation system that feature rock-wool, calcium silicate or fiberglass as part of the insulation system for hot processes. The HPC insulation system provides a tremendous CUI free, energy savings deliverable, that is second to none.

read more

31 Jul 2017

Fire Coating

OMEGA FIRE is a one-component coating having a blend of eight different ceramics combined in a water-based formula to create a barrier against extreme flame impingement and heat migration

Build extra safety into structures with Omega Fire™, a ceramic-loaded, water-borne fireproofing coating. Omega Fire™ stays intact above 2000 degrees F (1100 degrees C) and has a 2-3 hour fire rating. Using the combination of HPC and Omega Fire™, a 7-hour rating was achieved on a support beam inside the furnace at 2000 degrees F (1100 C).

read more
24 Jul 2017
24 Jul 2017

Floor and Concrete Coating Solutions

Concrete Flooring:  

TOTAL SEAL: Total Seal is a two-part epoxy coating system that has been specifically designed with specific additives to promote adhesion when used on concrete and masonry. TOTAL SEAL was developed to be applied to surfaces that have hydrostatic pressures and moisture mitigation. It is a water repelling epoxy for use under water or in areas where constant splashing or condensation is a problem. It is resistant to chemicals and solvents, and can be applied directly to concrete, masonry and wood.

read more
24 Jul 2017

Corrosion Coatings

RUST GRIP®:

RUST GRIP® is a tough, one-part, moisture-cure polyurethane coating that absorbs atmospheric moisture to cure. RUST GRIP®  is  loaded with a metallic pigment for strength and is also resistant to chemical solvents and acid splash. Upon curing, RUST GRIP® provides a protective coating film of superior adhesion and flexibility, and is resistant to abrasion and impact. RUST GRIP® can be used  as  a primer or as a one-coating system. It is patented to encapsulate lead- based paints and other toxic materials, including asbestos. RUST GRIP® can be applied over pressure- ashed, completely dry flash rust and firmly bonded commercial paints. In most cases, a white or near- white blasting is not required. A light to medium surface rust is preferred as the profile

Moist MetalGrip:

MOIST METAL GRIP is a two-part epoxy coating system that has been specifically designed with specific additives to promote adhesion when used on metal. MOIST METAL GRIP was developed to be applied to metal surfaces that cannot be dry enough to use RUST GRIP®. It can be applied directly to wet or damp metal surfaces and maintain excellent adhesion to prevent further surface corrosion. It is a water repelling epoxy for use under water or in areas where constant splashing or condensation is a problem. It is resistant to chemicals and solvents, and is designed to be applied directly to concrete, masonry and wood

Rustgrip E:

RUST GRIP-E is a two-part epoxy coating system that has been designed with specific additives to promote adhesion when used on metal, and contains metallic pigment used I our regular RUST GRIP®  to strengthen coating and retard chalking. RUST GRIP-E was developed to be applied to metal surfaces that cannot be dry enough to use traditional RUST GRIP® and the surface tensile strength requirements exceed that of Moist Metlagrip. It can be used directly to wet or damp metal surfaces and maintain excellent adhesion to prevent further surface corrosion. It is a water repelling epoxy for use under water or in areas where constant splashing or condensation is a problem. It is resistant to chemicals and solvents, and is designed to be applied directly to concrete, masonry and metal. RUST GRIP-E must be top-coated to prevent chalking

 

read more
24 Jul 2017

High Temperature Insulation

HPC® Coating and HPC®-HT are designed to control heat transfer on hot surface temperatures up to 1,112°F (600°C). HPC® Coating offers a “Green”, non-flammable, non-toxic formula for high heat surface applications over standard steam pipe or oven wall construction. HPC® Coating is easily applied using a texture sprayer, and can be applied over metal, concrete, wood, and other substrates.

HPC® is water-borne and extremely lightweight in appearance. HPC® Coating uses a special acrylic resin blend with specific ceramic compounds added to provide a non-conductive block against heat transfer. HPC can be used stand alone on surface temperatures up to 550°F (287°C).

The resin base of HPC® is organic and will char when the hot surface exceeds 550°F (287°C). The char effect does not impact insulation performance but can cause a slight dis-bondment. As such, for surface temperatures over 550°F (287°C), our HPC®-HT is used as a base coat before applying HPC®.

HPC®-HT is a two-part (A+B) hybrid acrylic/silicone resin, water-based coating using specific ceramic compound loads for application directly over surfaces 200°C (392°F) and up to 600°C (1112°F). Both HPC® and HPC®-HT are designed to block and hold the interior temperature on the surface and reduce heat transfer loss to ambient.

read more
09 Jul 2017

Solar Heat Blocking

Super Therm

SUPER THERM® is a water-borne combination of high-performance aliphatic urethanes, elastomeric acrylics, and resin additives which produces  a  tough,  yet  flexible  coating  film.  Designed   for performance and durability, SUPER  THERM®  contains  4  unique  ceramics to block up to 95% of solar heat entering a structure due to visual light, ultra violet (UV) and infrared  (IR).  SUPER  THERM®  is  a flexible membrane with low permeability that can greatly reduce expansion and contraction of a roof. It also prevents corrosion and surface  deterioration.

Sunshield

SUNSHIELD is a water-borne   combination of  high-performance duo of elastomeric acrylics and resin additives, which produces a tough, yet flexible coating film. It combines four different ceramics that provide both heat reflectivity and heat-blocking properties. SUNSHIELD is a flexible membrane with low permeability that can greatly reduce expansion and contraction of a roof. SUNSHIELD’s blend of resin additives produce  a  flexible coating  membrane  that  can  be  applied directly to any surface. It also prevents corrosion and surface deterioration. Although durable and offering solar blocking performance, SUNSHIELD does not give the same benefits as SUPER THERM®.

 

© 2020 Superior Products Coatings, Inc. All rights reserved.

back to top